Modelling and analysis of stepped bearings under stochastic conditions with Rabinowitsch fluids
DOI:
https://doi.org/10.14311/AP.2026.66.0262Keywords:
non-Newtonian lubrication, Rabinowitsch fluid, circular stepped plates, surface roughness, viscosity variation, squeeze filmAbstract
This study examines the hydrodynamic behaviour of circular stepped plates lubricated with Rabinowitsch fluids, focusing on the interaction between surface roughness (SR), viscosity variation (V-V) and squeeze film dynamics. A stochastic approach, that combines Christensen’s roughness theory with a viscosity-film thickness correlation, is employed to evaluate the load-carrying capacity (LCC) and squeeze response time (SRT) under different operating conditions. The findings demonstrate that radial roughness patterns paired with dilatant lubricants significantly enhance LCC and film pressure compared to azimuthal roughness and pseudoplastic fluids. Furthermore, the stepped plate design significantly intensifies the effects of viscosity variation, demonstrating its effectiveness in improving lubrication in challenging applications. These results highlight the potential for optimising lubrication strategies to achieve greater reliability and operational efficiency. The insights gained are particularly relevant for designing high-precision bearing systems in industrial and biomedical applications, where adaptability and performance are essential. This research advances the understanding of non-Newtonian fluid behaviour in complex systems and suggests innovative pathways for improved lubrication solutions.
Downloads
References
[1] L. Lindemann. Future challenges of the lubricants industry. FUCHS Capital Market Day 2018.
[2] H. A. Spikes. The behaviour of lubricants in contacts: Current understanding and future possibilities. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 208(1):3–15, 1994. https://doi.org/10.1243/PIME_PROC_1994_208_345_02
[3] S. Wada, H. Hayashi. Hydrodynamic lubrication of journal bearings by pseudo-plastic lubricants: Part 1, Theoretical studies. Bulletin of JSME 14(69):268–278, 1971. https://doi.org/10.1299/jsme1958.14.268
[4] S. Wada, H. Hayashi. Hydrodynamic lubrication of journal bearings by pseudo-plastic lubricants: Part 2, Experimental studies. Bulletin of JSME 14(69):279–286, 1971. https://doi.org/10.1299/jsme1958.14.279
[5] Y. Huang, Z. Tian. A new derivation to study the steady performance of hydrostatic thrust bearing: Rabinowitch fluid model. Journal of Non-Newtonian Fluid Mechanics 246:31–35, 2017. https://doi.org/10.1016/j.jnnfm.2017.04.012
[6] J.-R. Lin. Non-Newtonian squeeze film characteristics between parallel annular disks: Rabinowitsch fluid model. Tribology International 52:190–194, 2012. https://doi.org/10.1016/j.triboint.2012.02.017
[7] S. K. Yadav, S. C. Sharma. Performance of hydrostatic tilted thrust pad bearings of various recess shapes operating with non-Newtonian lubricant. Finite Elements in Analysis and Design 87:43–55, 2014. https://doi.org/10.1016/j.finel.2014.04.009
[8] S. K. Yadav, A. K. Rajput, N. Ram, S. C. Sharma. A direct numerical approach to compute the nonlinear rotordynamic coefficient of the noncircular gas journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232(4):453–468, 2017. https://doi.org/10.1177/1350650117719602
[9] U. P. Singh, R. S. Gupta, V. K. Kapur. On the squeeze film characteristics between a long cylinder and a flat plate: Rabinowitsch model. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227(1):34–42, 2013. https://doi.org/10.1177/1350650112458742
[10] N. B. Naduvinamani, M. Rajashekar, A. K. Kadadi. Squeeze film lubrication between circular stepped plates: Rabinowitsch fluid model. Tribology International 73:78–82, 2014. https://doi.org/10.1016/j.triboint.2014.01.004
[11] J. A. Haider, N. Muhammad. Computation of thermal energy in a rectangular cavity with a heated top wall. International Journal of Modern Physics B 36(29):2250212, 2022. https://doi.org/10.1142/S0217979222502125
[12] J. A. Haider, N. A. Ahammad, M. N. Khan, et al. Insight into the study of natural convection heat transfer mechanisms in a square cavity via finite volume method. International Journal of Modern Physics B 37(4):2350038, 2023. https://doi.org/10.1142/S0217979223500388
[13] T. Dass, S. R. Gunakala, D. M. G. Dyer, V. M. Job. Analysis of the journal bearing with rabinowitsch fluid lubricant under the effects of velocity slip and variable viscosity. Journal of Thermal Analysis and Calorimetry 149(13):7095–7120, 2024. https://doi.org/10.1007/s10973-024-12989-w
[14] B. Manser, S. Khelladi, M. Deligant, et al. Behaviour of hydrodynamic journal bearing under the combined influence of textured surface and non-Newtonian Rabinowitsch fluid model. In E3S Web of Conferences, vol. 321, p. 03006. 2021. https://doi.org/10.1051/e3sconf/202132103006
[15] S. B. Patil, Bharati, H. B. Naganagowda, S. Malipatil. Squeeze film lubrication between rough secant circular plates with Rabinowitsch fluid model. 2nd International Conference on Recent Trends in Applied and Computational Mathematics: ICRTACM-2021 2649(1):030066, 2023. https://doi.org/10.1063/5.0147523
[16] B. Manser, S. Khelladi, M. Deligant, et al. Performance of hydrodynamic textured journal bearing with the combined influence of elastic deformation and pseudo-plastic lubricant. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237(10):1885–1912, 2023. https://doi.org/10.1177/13506501231179526
[17] R. Vinutha, B. Hanumagowda, K. Vasanth. Effect of magnetic field and slip velocity on the performance of bearings lubricated by couple stress fluid on long cylinder and infinite plate – A theoretical analysis. Modern Physics Letters B 38(30):2450176, 2024. https://doi.org/10.1142/S0217984924501768
[18] G. D. Tessema, G. A. Derese, A. A. Tiruneh. Bearing performance analysis of the thermal and surface roughness effects by finite element method on slider bearings through non-Newtonian fluid-type lubricant. International Journal of Aerospace Engineering 2024(1):3290140, 2024. https://doi.org/10.1155/ijae/3290140
[19] D. K. Chauhan, J. Patel, G. M. Deheri. Enhanced performance of step slider bearings with couple stress and magnetic fluid lubrication incorporating sinusoidal magnitude: A theoretical investigation. Journal of Mechanical Engineering and Sciences 19(2):10620–10630, 2025. https://doi.org/10.15282/jmes.19.2.2025.4.0832
[20] J. A. Haider, S. Ahmad. Dynamics of the Rabinowitsch fluid in a reduced form of elliptic duct using finite volume method. International Journal of Modern Physics B 36(30):2250217, 2022. https://doi.org/10.1142/S0217979222502174
[21] J. A. Haider, N. Muhammad. Mathematical analysis of flow passing through a rectangular nozzle. International Journal of Modern Physics B 36(26):2250176, 2022. https://doi.org/10.1142/S0217979222501764
[22] S. Nadeem, J. A. Haider, S. Akhtar, S. Ali. Numerical simulations of convective heat transfer of a viscous fluid inside a rectangular cavity with heated rotating obstacles. International Journal of Modern Physics B 36(28):2250200, 2022. https://doi.org/10.1142/S0217979222502009
[23] A. Singh, S. C. Sharma, N. R. Chauhan. Performance behaviour of double layer conical porous hybrid journal bearing operated with pseudoplastic lubricant. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 239(1):37–58, 2024. https://doi.org/10.1177/13506501241272764
[24] S. Sheela, R. Arunkumar, B. N. Hanumagowda, et al. Magnetohydrodynamic squeeze film characteristics of micropolar fluids with piezo-viscous dependency between wide parallel rectangular plates. Multiscale and Multidisciplinary Modeling, Experiments and Design 8(1):109, 2025. https://doi.org/10.1007/s41939-024-00688-w
[25] A. Cameron. Basic lubrication theory. Ellis Horwood, 1976.
[26] U. P. Singh. Analysis of squeeze films between rough circular plates lubricated with Rabinowitsch fluids. American Journal of Mechanics and Applications 7(1):1–9, 2019. https://doi.org/10.11648/j.ajma.20190701.11
[27] Y. D. Vashi, R. M. Patel, G. M. Deheri. Ferrofluid based squeeze film lubrication between rough stepped plates with couple stress effect. Journal of Applied Fluid Mechanics 11(3):597–612, 2018. https://doi.org/10.29252/jafm.11.03.27854
[28] R. Lakshmi, B. N. Hanumagowda, C. K. Sreekala, et al. Study of the effects of squeeze film lubrication on the variation of viscosity between the sphere and the porous wall plate using the Rabinowitsch fluid model. Pramana 99(3):82, 2025. https://doi.org/10.1007/s12043-025-02922-7
[29] K. B. Ranganath, S. H. Marulappa, H. B. Naganagowda, et al. Investigation of squeeze film characteristics between a sphere and a flat plate in the presence of porous medium: Rabinowitsch fluid model. Zeitschrift für Angewandte Mathematik und Mechanik 105(5):e70015, 2025. https://doi.org/10.1002/zamm.70015
[30] N. Patir, H. S. Cheng. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication. Journal of Lubrication Technology 100(1):12–17, 1978. https://doi.org/10.1115/1.3453103
[31] N. Patir, H. S. Cheng. Application of average flow model to lubrication between rough sliding surfaces. Journal of Lubrication Technology 101(2):220–229, 1979. https://doi.org/10.1115/1.3453329
[32] H. Christensen. Stochastic models for hydrodynamic lubrication of rough surfaces. Proceedings of the Institution of Mechanical Engineers 184(1):1013–1026, 1969. https://doi.org/10.1243/PIME_PROC_1969_184_074_02
[33] H. Christensen. Some aspects of the functional influence of surface roughness in lubrication. Wear 17(2):149–162, 1971. https://doi.org/10.1016/0043-1648(71)90025-1
[34] J. Prakash, K. Tonder. Roughness effects in circular squeeze-plates. ASLE Transactions 20(3):257–263, 1977. https://doi.org/10.1080/05698197708982840
[35] N. B. Naduvinamani, A. Siddangouda. Combined effects of surface roughness and couple stresses on squeeze film lubrication between porous circular stepped plates. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221(4):525–534, 2007. https://doi.org/10.1243/13506501JET204
[36] N. B. Naduvinamani, S. Apparao, S. S. Siddapur. On non-Newtonian Rabinowitsch fluid squeeze film lubrication between rough circular stepped plates. Tribology Online 11(4):519–526, 2016. https://doi.org/10.2474/trol.11.519
[37] N. Tipei. Theory of lubrication: with applications to liquid-and gas-film lubrication. Stanford University Press, 1962.
[38] P. Sinha, C. Singh, K. R. Prasad. Effect of viscosity variation due to lubricant additives in journal bearings. Wear 66(2):175–188, 1981. https://doi.org/10.1016/0043-1648(81)90112-5
[39] J. U. Rahman, A. Mannan, M. E. Ghoneim, et al. Insight into the study of some nonlinear evolution problems: Applications based on variation iteration method with Laplace. International Journal of Modern Physics B 37(3):2350030, 2023. https://doi.org/10.1142/S0217979223500303
[40] M. Zahid, A. Younus, M. E. Ghoneim, et al. Quaternion-valued exponential matrices and its fundamental properties. International Journal of Modern Physics B 37(03):2350027, 2023. https://doi.org/10.1142/S0217979223500273
[41] S. Asghar, J. A. Haider, N. Muhammad. The modified KdV equation for a nonlinear evolution problem with perturbation technique. International Journal of Modern Physics B 36(24):2250160, 2022. https://doi.org/10.1142/S0217979222501600
[42] J. A. Haider, S. Asghar, S. Nadeem. Travelling wave solutions of the third-order KdV equation using Jacobi elliptic function method. International Journal of Modern Physics B 37(12):2350117, 2023. https://doi.org/10.1142/S0217979223501175
[43] J. R. Patel, G. M. Deheri. A comparison of porous structures on the performance of a magnetic fluid based rough short bearing. Tribology in industry 35(3):177–189, 2013.
[44] J. R. Patel, G. Deheri. Viscosity variation effect on the magnetic fluid lubrication of a short bearing. Journal of the Serbian Society for Computational Mechanics 13(2):56–66, 2019. https://doi.org/10.24874/jsscm.2019.13.02.05
[45] J. Patel, G. M. Deheri. Influence of viscosity variation on ferrofluid based long bearing. Reports in Mechanical Engineering 3(1):37–45, 2022. https://doi.org/10.31181/rme200103037j
[46] P. S. Rao, A. K. Rahul. Pressure generation in rough conical bearing using non-Newtonian Rabinowitsch fluid with variable viscosity. Industrial Lubrication and Tribology 71(3):357–365, 2019. https://doi.org/10.1108/ILT-01-2018-0035
[47] P. S. Rao, A. K. Rahul. Effect of viscosity variation on non-newtonian lubrication of squeeze film conical bearing having porous wall operating with Rabinowitsch fluid model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233(7):2538–2551, 2018. https://doi.org/10.1177/0954406218790285
[48] P. S. Rao, A. K. Rahul. Combined effect of viscosity variation and non-Newtonian Rabinowitsch fluid in wide parallel rectangular-porous plate with squeeze-film characteristics. Meccanica 54(15):2399–2409, 2019. https://doi.org/10.1007/s11012-019-01092-2
[49] A. K. Rahul, M. K. Singh, S. Paul, et al. Performance analysis of annular disks with non-Newtonian Rabinowitsch fluid model: Influence of squeeze film pressure, surface roughness, porosity and viscosity variation. International Journal of Modern Physics B 38(20):2450268, 2024. https://doi.org/10.1142/S0217979224502680
[50] A. K. Rahul, M. K. Singh, S. Saha. Squeeze film lubrication analysis and optimization of porous annular disk with viscosity variation of non-Newtonian fluid: Rabinowitsch fluid model. Tribology International 179:108060, 2023. https://doi.org/10.1016/j.triboint.2022.108060
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Palani Deepak, Amit Kumar Rahul
This work is licensed under a Creative Commons Attribution 4.0 International License.
